Printing & Paper

Minimal abrasion from dry ice cleaning leaves surfaces undamaged and with no moisture, ready for use.

Buildings

Ideal for sensitive projects where water would cause problems and sandblasting would damage the original surfaces.

Nuclear

Precision and heat sensitive equipment remains safe with dry ice cleaning. No contaminant disposal costs.

Food
Ovens & Furnaces can be cleaned while still hot as no steam is created using dry ice.
Manufacturing
The minimal abrasion of dry ice cleaning means that tools, dies and moulds last longer and makes cost effective sense.
General Use
Dry ice cleaning is perfect for inside use as no wet floors are left behind. Debris can be simply swept away!
Authorities
High mobility makes dry ice cleaning perfect for local authority use.
Standard accessories
Blasting gun
4.775-566
Ergonomically shaped housing, easy nozzle changeover, selector for compressed air and ice or air only
Blasting hose
4.013-039
7m, with quick-action coupling and electric connection
Pencil jet nozzle, small
4.130-418
For extreme contamination as well as low compressor power
Fan jet nozzle
4.130-423
High area coverage with good cleaning power
Fan jet nozzle, 10 mm
4.130-422
Changes flow rate
Nozzle grease
6.288-072
Silicone grease for aluminium threads of nozzles
Nozzle case
6.421-311
With foam liner
Water separator
2.641-249
Filter included
Optional accessories
Angled blasting nozzle
4.321-203
90 degree nozzle, can be used in combination with all available nozzles. Connector 4.130-425 required
Angled blasting nozzle
4.321-204
105 degree nozzle, can be used in combination with all available nozzles. Connector 4.130-425 required
Angled nozzle connector
4.130-425
Necessary to connect nozzles (above).
(4.321-203 and 4.321-204)
Pencil jet nozzle, large
4.130-419
For lighter soiling
Fan jet nozzle insert, 6mm
4.130-421
Changes flow rate
Fan jet nozzle insert, 8mm
4.130-420
Changes flow rate
Scrambler
4.110-015
Reduces the size of dry ice pellets into finer particles.
Ideal for cleaning highly sensitive surfaces
Nozzle extension
4.130-417
Makes operation easier in special applications
Handle
6.321-206
For use with nozzle extension
Dry ice shovel
4.321-198
Stainless steel with insulated handle
Earmuffs
6.321-207
Safety goggles
6.321-208
With side protection and elastic headband
Protective gloves
6.321-210
One size fits all
Wrench
7.815-009
Flat wrench for nozzle changes (2 required)