Printing & Paper

Minimal abrasion from dry ice cleaning leaves surfaces undamaged and with no moisture, ready for use.


Ideal for sensitive projects where water would cause problems and sandblasting would damage the original surfaces.


Precision and heat sensitive equipment remains safe with dry ice cleaning. No contaminant disposal costs.

Ovens & Furnaces can be cleaned while still hot as no steam is created using dry ice.
The minimal abrasion of dry ice cleaning means that tools, dies and moulds last longer and makes cost effective sense.
General Use
Dry ice cleaning is perfect for inside use as no wet floors are left behind. Debris can be simply swept away!
High mobility makes dry ice cleaning perfect for local authority use.

Technical Specification:

IB 7/40 (110v/240v) IB 15/80 (110v/240v)
Order No. 1.574-006/-002 9.533-643/-644
Dry ice quantity (kg/h) 15-50 30-100
Dry ice capacity (kg) 18 35
Dry ice pellets (∅) 3 mm 3 mm
Working pressure (Mpa/bar) 0.2-1.0 / 2.0-10.0 0.3-1.6 / 3.0-16.0
Air volume stream (m³/min / CFM) 0.5-3.5 / 18-124 3.0-11.0 / 106-389
Air hose (∅) 1" 1"
Connected load (kW) 0.6 0.6
Power supply (~/v/Hz) 1/110/50 / 1/240/50 1/110/50 / 1/240/50
Noise level (dB/A) 99 125
Weight (kg) 71 90
Dimensions L x W x H (mm) 760 x 510 x 1100 720 x 850 x 1100
Digital display panel Yes No
Dosage unit self adjusting Yes Yes
Integrated earth wire Yes No
Tank emptying Yes No
Castors with brake Yes No
Push cart principle Yes Yes
Drive Electric Electric
Blasting gun with remote control Yes No
Oil / water separator Yes Yes
Blasting hose storage Yes Yes
Suitable with in-house compressed air systems Yes No